ban
Position:Home  /  Product Wiki  /  Routine Maintenance Of Crawler Mucking Loader

Routine Maintenance Of Crawler Mucking Loader

Date:2020-02-28     Label:

Crawler Mucking Loader

Mucking Loader

During the construction, the Crawler Mucking Loader often has some minor problems, but the role and status of the mining mucking loader in construction is very important. So take everyone to see some of its daily inspections and maintenance today.

Crawler Mucking Loader Has Abnormal Noise

In order to check the problems of the oil pump, in general, the abnormal noise is caused by the blockage and sealing of the oil filter in the oil inlet. If this happens, the filter and the filter should be cleaned quickly to avoid causing excessive damage. Look at the problem of the related mechanical parts. If the inside of the part enters the air, abnormal noise will occur. When the oil in the Crawler Mucking Loader hydraulic system is contaminated, it is necessary to replace the oil. It is the mechanical sound caused by the damage of the parts, and the sound after the friction occurs after the operation.

Crawler Mucking Loader'S "Blocking"

The resistance of the Crawler Mucking Loader's output line is too great, and its resistance is adjusted appropriately. The oil contains too much water and replaces the new oil. The flow path of the Crawler Mucking Loader pump is blocked and the flow path is dredged. Sealing the mouth ring, the sealing nature of the mouth ring has worn out, replace it with a new one. The filter is blocked and the impurities on the filter surface are cleaned.


+

+

Please leave a message
skype
message