We should all have encountered a sudden failure of the machine in use, which not only delays our time but also delays our work. Now, in order to make the tunnel mucking machine work better in use, this requires us to minimize the use. The occurrence of a fault.
1.tunnel mucking machine must not be overloaded
If the mucking machine is often overloaded, the wear rate of its internal parts will increase greatly, resulting in an increase in the failure rate and a reduction in the service life of the machine. Then, in order to make the mucking machine work under normal load, the operator is required to strictly follow the operating procedures. It is strictly forbidden to use the machine in violation of regulations, causing the engine and working device to fluctuate greatly.
2. the correct choice of lubricant
Most of the failures caused by mucking machine wear are caused by wear on the working face of the parts. A large part of the wear and tear on the working face of the parts is caused by the wrong use of the lubricant. Then the correct and reasonable choice of lubricants has become one of the effective measures to reduce the failure rate of mucking machine. When using the lubricant of the tunnel mucking machine on a daily basis, remember to strictly follow the standards. According to different mechanical models and structures, choose the corresponding lubricant, and it is strictly forbidden to use the misuse to cause mechanical failure.
3. Regular maintenance and maintenance.
In order to better let the tunnel mucking machine work for us, the relevant personnel should regularly repair and maintain it. Because timely handling of faults is a powerful measure to reduce and prevent faults. Remember not to ignore because the cause is small, because it is often a small problem that is easily overlooked by us. After a long period of wear or a superposition of multiple small faults, it causes a big fault. In severe cases, it may even cause a safety accident. occur.
