Mini mucking loader
When disassembling the tires of a large wheeled skimmer, it is more difficult to separate the tires and the rim. Since it has not been disassembled for a long time, the rim may be rusted, and the tire and the rim are tightly adhered. The method of deflation, back and forth walking and rolling is not ideal, but the following method can achieve better results: after removing the lock ring, add water between the tire and the rim to lubricate, use Two bulldozer blades press the two sides of the tire respectively. The middle is made of a suitable length of iron rod on the rim, and then the wire rope is lifted by a crane or a loader, so that the tire and the rim are easily separated.
Mini mucking loader wrench bolt
Sometimes the wrench that is carried by the mini mucking loader is incomplete, and there is a problem with the disassembly. At this point, the following method can be used to relieve the eyebrows (mainly for the wrench, open end wrench and hex wrench). If the plum or open-end wrench used is larger than the bolt head (or nut) to be screwed, the hex wrench is smaller than the bolt head to be screwed, and can be placed inside the wrench (plum, open-end wrench) or outside the wrench (hex wrench) Some copper, wire or screwdriver, etc., and then slowly disassemble and install; and when the open-end wrench is smaller than the bolt head (or nut) and the hex wrench is larger than the bolt head, the open-end wrench can be opened with a file. Large, the hexagonal size of the Allen key is reduced. Through the above treatment, emergency disassembly and assembly work can be solved in most cases, and the modified wrench can be reserved for later use.
