Many people will have a lot of problems when using the crawler mucking loader. It is also very common in the case where the crawler mucking loader is weak or the vehicle is weak. Many times it is only caused by some minor problems, but some people are unclear about some tips. They will mistakenly think that the crawler mucking loader is broken, or is it a problem with the big arm.
1. The hydraulic oil pipe is clogged or there is air in the pipe when it is replaced. This kind of situation generally causes the working condition of the oil pipe conveying component to be weak. At this time, in addition to replacing the hydraulic oil, the hydraulic oil pipe must be tested to see if there is air. Regular maintenance of the crawler mucking loader to ensure that the hydraulic fluid is clean and to prevent air in the tubing.
2, crawler mucking loader safety valve blocked or hydraulic oil filter blocked, this kind of situation will lead to the crawler mucking loader vehicle due to hydraulic oil delivery is not timely and the whole car is weak. In the case of a safety valve, only new products can be replaced, and the filter should be cleaned to prevent clogging. Billion coal Xiaobian suggested: crawler mucking loader uses one to two months to clean the hydraulic oil filter to prevent blockage. And regular maintenance of the crawler mucking loader.
3. The hydraulic oil is used too long, and the accumulation of oil magazines makes the hydraulic oil dirty and causes the crawler mucking loader to work weakly. In this kind of situation, we can think about whether the hydraulic oil has not been replaced for a long time? Recommendation: If conditions permit, it is best to replace it once every three to five months. This will ensure the cleanliness of the hydraulic oil and ensure efficient work efficiency in the crawler mucking loader.
