1. the diameter of the stone
The mucking rock loader must pay attention to the size of the stone when it is to lose the broken rock. At the time of design, each mine mucking rock loader has a limited size of stones. According to the width of the conveyor belt, the stones cannot be too large. If we save the cost, there is no scientific calculation during the firing, which causes the crushing. The stone is too large and it is easy to scratch the conveyor belt, causing unnecessary losses.
Mining mucking rock loader
2,. lubrication on time
During the operation of the mining mucking rock loader, because the big, small arms and buckets continue to reciprocate, it is easy to cause the wear pin to wear, so we need to regularly put in the butter. For the number of times of buttering, we need to determine the degree of wear of the pin.
Mining mucking rock loader
3. regular replacement of hydraulic oil
After the hydraulic oil has been used for a period of time, it is inevitable to mix in the dust because it is working in the mine. If the accumulated dust for a long time is mixed into the hydraulic system, the oil pump, the operating valve and the flow divider may be blocked, which may cause the whole machine to be weak. However, we will reduce the service life of the mucking rock loader, so we must develop the habit of regularly changing hydraulic oil.
