Small wheel slag skimmers rely on wheels to walk, and broken tires directly affect the production schedule and construction efficiency. Today I will tell you the reasons that affect the service life of small wheel slag scraper tires.
1. Air pressure. Too high air pressure will result in a smaller tread contact area, increased tension at the lip area, early wear of the tread center, and the tread and bead are prone to impact and burst; too low air pressure will cause deformation of the carcass, concave tread, and tire load Insufficient capacity, early wear of the shoulder, the carcass is easily damaged and the curtain yarn is easily broken;
2.Load.Excessive load will cause increased stress on the shoulder of the tire and large deformation of the bead, which will easily cause the tire to heat up and cause accelerated wear of the tread;
3.Driving speed. Uninterrupted driving of tires over long distances can easily cause abnormal heating of the tire, coking in the tire, abnormal separation of the tread and flat tire
4.Car condition . Keeping the car condition intact, especially the technical condition of the chassis parts is good, is an effective measure to prevent early damage to the tire. When the chassis components are improperly assembled or malfunctioned, the tire cannot roll smoothly, causing slippage, dragging, or shimmy, which causes damage to the tire. In addition, the oil leakage fault causes the oil to drip onto the tire, and the eroded rubber will also cause early tire damage.
