Everyone knows that the muck loader conveyor belt is a wearing part (consumable) of the wheel muck loader. Generally speaking, the life of a conveyor belt is about six months. If properly maintained, it can use seven to eight Month to year is not impossible. Today, the editor of the exporter of muck loader will take you to learn some common sense of conveyor belt maintenance of muck loader and miner.
1. When the muck loader is walking, it is strictly forbidden to rotate the conveyor belt to reduce the rotation frequency of the conveyor belt and extend its service life.
2. When the muck loader is digging and picking up, there may be some large stones, especially large stones with sharp edges. Be careful not to force through the gantry to prevent the conveyor belt from being scratched one by one. At this point, you can break the hundreds of kilograms of stones and then load them.
3. The slag loader is working (during digging and slagging), pay attention to the bucket teeth not to hang on the rotating conveyor belt.
4. If the muck loader is used for a long time, the roller may fall off. At this time, it should be handled in time to prevent the conveyor belt from hanging.
5. When the slag loader excavates and transports, after the shovel mouth is raised, the life of the conveyor belt is reduced because the stones under the driven roller just support the rotating conveyor belt.
Of course, if the tunnel is used for earthwork and properly maintained, the conveyor belt will last longer.
In the work of the miner, the conveyor belt is one of the parts that often come into contact with the stone, so its life may increase with the use time, and the lack of maintenance knowledge of the operator causes the wearing parts including the conveyor belt to wear . Therefore, the operator's knowledge of the maintenance and maintenance of the muck loader determines the life of the vulnerable parts of the miner.
