It is not uncommon for the transmission of the mucking loader to skip gears, nor is it an unexplained occurrence. Therefore, today the editor of the mucking loader manufacturer will bring you the reasons for the shift of the mucking loader.
1.Due to improper adjustment of the shifting device, the transmission of the mucking loader adopts a mechanical manual shifting method. If the shift lever, vertical axis, horizontal axis and vertical fixing screws are loose, it is likely to cause the transmission to skip gears. Case.
2.The muck loader mainly adopts a mechanical gear shifting transmission mechanism. This transmission mechanism relies on the sliding gear sleeve to move axially on the fixed gear sleeve and mesh with the driven gears of each gear. The purpose of shifting.
Of course, in the process of frequent shifting, the tooth end faces of each meshing gear are easily ground into a conical state, which causes the meshing performance to decrease too fast and causes "shift" to occur.
3.If the operating method of the operator is improper, the transmission "jumping" occurs when the muck loader is driving on the slope.
The above is about the reasons for the gear shifting of the mining mucking loader transmission. I hope that it will be helpful to all operators in their daily operations.
