There are various types of mucking loaders, which can not only adapt to different environments, but also perform well in places with slopes. With the increase of use time, the mucking loader also needs a major inspection, so what does its safety inspection include?
1. Inspection of the connecting parts of each part of the tunnel mucking loader
Whether the connection of the tunnel mucking loader is normal or not is one of the important factors related to personnel safety and safe production. If there is a problem or abnormal noise in the connecting parts, it will cause abnormal steering, braking and operation. Therefore, the inspection of the connecting parts of various accessories of the slag scraper cannot be ignored.
Not only that, when checking the safety of the vehicle, you should also pay attention to the various hose joints and electrical equipment plugs around the tunnel mucking loader engine, and check the firmness of these parts and accessories to see if there are any. Move lightly. If looseness is found, it should be repaired immediately to prevent oil leakage and electric leakage of the tunnel mucking loader caused by scraping with other parts when the parts are working in the tunnel due to looseness.
2. Inspection of oil level and quality
The driving of the mucking machine is inseparable from the hydraulic oil, and the oil is the power source of the mucking machine. While checking the safety of the mucking machine, we should also pay attention to the oil level of the vehicle, so as to judge whether the oil is sufficient for use.
The inspection of slag skimming oil level includes: lubricating oil level, brake fluid level, and hydraulic oil level. These types of fluids are necessary for the vehicle, so the fluid inspection should be accurate and meticulous. Different oils have different characteristics, and it is necessary to have a certain degree of understanding of the properties and characteristics of the oil in order to select the appropriate oil for the slag scraper, which is not only conducive to vehicle maintenance, reducing wear and tear, but also reducing costs. The oil will be depleted and oxidized with the increase of temperature, so it will lead to the volatilization of the oil and the change of performance, so the oil quality of the vehicle should be checked frequently.
tunnel mucking machine,crawler mucking loader,mini mucking loader,mucking rock loader
Unique Skills Of Mine Tunnel Mucking Machine In Roadway Wading
The mining tunnel mucking machine is a vehicle mainly used in the mining industry. It is very powerful in use and is an indispensable equipment in the mining industry. However, the driving of the mining slag scraper cannot avoid wading. Let's learn about the small folding tail slag scraper and the unique skills of mining tunnel mucking machine wading in water.
When the small folding tail crawler mucking loader mucking rock loader is wading in water, ensure that the engine runs normally, the steering and braking mechanisms are sensitive, and drive into the water smoothly at low speed to avoid high throttle or collision, and prevent water splashing into the engine and stalling; when driving, you should hold the accelerator tightly, Go through the water in one go, avoiding stops or sharp turns as much as possible. When you reach a waterless road, you should step on the brakes a few times to avoid rear-end collisions caused by brake failure. In order to avoid multiple vehicles wading in the water at the same time, it is necessary to wait for the preceding vehicle to pass, and then wait for the rear vehicle to enter the water, so as to prevent the preceding vehicle from stopping due to failure, forcing the mucking rock loader to stop in the water, and falling into a dilemma; if the water spray wets the circuit, or If the vehicle stalls after water overflows the exhaust, do not attempt to re-ignite (unless the engine does not require ignition). Immediately turn off all electrical circuits on the vehicle and push the vehicle to the side of the road. Wait until the water level is below the exhaust, then add a foot of oil while driving and keep it at 2000 rpm. Wait for the engine to work stably before driving; if the water is too deep, the engine of the mine crawler mucking loader will stall due to water ingress. Do not start the engine again, but tow it to a repair shop. Otherwise the engine will be scrapped.
In the coming rainy season, mastering the production and maintenance skills of some small mining mini mucking loaders can save you a lot of unnecessary trouble in the later stage, and it will not affect the progress of the project.
