The tunnel mucking machine is mainly used for driving and scraping. The crawler mucking loader consists of three main mechanisms of excavation and conveying and two main systems of hydraulic and electrical.
A lot of people have a habit of increasing the throttle when they start
to start. In fact, this is wrong, and the damage to the mucking rock loader is relatively large. Here's why the mini mucking loader can't slam the gas pedal when it starts.
1. Warm-up of the small tunnel mucking rock loader:
let all parts of the machine be heated slowly and evenly to normal
working temperature, reduce wear and avoid underground mechanical
strain.
2. The wheeled belt mucking rock loader should ensure lubrication: when the diesel engine is just started, the
lubricating oil has a high viscosity, and all parts are poorly
lubricated. After preheating, the lubricating oil will gradually reach
all lubricating parts to avoid dry friction and damage to the fit.
3. After the accelerator of the crawler mucking loader mine mini mucking loader is activated, the temperature of the tunnel mucking machine is low and the diesel oil does not burn. At this point, if you increase
the throttle and increase the fuel supply, the excess oil will not burn
the diesel and will form carbon deposits, which will exacerbate diesel
engine emissions. In addition, excess diesel may also flow into the
crankcase along the cylinder wall, affecting the cylinder wall
lubrication, and diluting the oil pan, reducing lubrication performance
and reducing the service life of the diesel engine.
