How should we maintain and remove the debris and dust inside the mini mucking loader
Cleaning debris in the mini mucking loader, must strictly implement the "stop power supply" system, there must be 3 people present, 1 person cleaning, 2 people monitoring, before cleaning mini mucking loader to stop power outage. Complete prohibition is required to operate. Then open the inside of the mucking loader, first clean up the residual material or dust around, and then clean up the hammer, conveyor system, shovel, and diesel engine, cylinder accessories of the residual material. When cleaning, use brush, towel and other cleaning tools to operate, so as not to hurt yourself. After cleaning the material, wipe it with 75% ethanol once, and then reinstall the removed parts. mucking rock loader.At this point, the interior has been cleaned, the remaining is the appearance of the mucking loader to clean up, the ground is also to clean up.
Clean up will, boot no load run, see if there is any mistake. Before preparing for use and starting up, check whether all parts of mucking rock loader inside the fuselage are securely installed and loose. Eliminate any potential safety risks in time. If there are any oil stains on the belt and pulley, wipe them with a clean cloth in time, and do not leave stains and dust. Only in the early stage we have done these cleaning work, so as to make the mucking rock loader in use will not appear in the jam and other conditions, so as not to affect your production and use, but also to make the mucking rock loader life longer.
