How To Solve The Motor Problem Of Tunnel Mucking Machine?
Whether the motor of the tunnel mucking machine is running normally can be preliminatively judged from the sound, speed, temperature, working current and other phenomena issued by the slag skimmer. Such as in the operation of the slag skimming machine leakage, speed suddenly reduced, violent vibration, abnormal sound, overheating smoke, or control electrical contact lighting smoke one of these phenomena, should immediately power off and stop maintenance. When taking the rotor, we must pay attention not to let the rotor chafe the stator winding end insulation. If the rotating shaft is too tight with the bearing or rust, it can be solved by heating. Motor maintenance generally choose 3 lithium - based grease. Pay attention to the cleaning of grease, do not let the motor of the slag scraper mixed with human dust, iron filings, sand, if the contaminated grease added to the bearing, it will cause the bearing wear speed up, so that the bearing damage in advance, pay attention to the use of lubricating oil when adding.
The motor of the tunnel mucking machine is a very important part of the mucking machine, if the motor of the mucking machine is not well maintained, then it is possible to make the motor damage, so that the slag skimming machine stop working, affecting the progress of the project, and the working place can not be replaced in time, the motor of the tunnel mucking machine should be well maintained.
