How To Determine Whether The Oil In The Tunnel Mucking Loader Has Expired
Oil is a very important and indispensable substance for electric Tunnel Mucking Loader, as it is the presence of oil that gives the Tunnel Mucking Loader the power to start running. Therefore, if the rock loader is to be able to start working properly, the oil must be of good quality, otherwise if it is out of date or if there are too many impurities, it will seriously affect its effectiveness. So how do you test the oil in a Tunnel Mucking Loader to see if it has expired? Come and learn with me below:
1、Smell method
If there is a strong sour smell, it means that the oil of the electric Tunnel Mucking Loader has deteriorated and should be replaced immediately.
2. Hand twisting method
Use your thumb and index finger to repeatedly grind the old oil, which is of good quality with lubricity, less abrasive and no sense of friction. If you feel that there are impurities, or even astringent, electric Tunnel Mucking Loader should replace the oil.
3. Colour identification method
Take a clean white filter test paper (available a good bit of Kleenex), drop a few points ofTunnel Mucking Loader old oil in the paper, to be oil leakage after the quality of good oil without powder, dry and smooth with your hands, and yellow colour infiltration with clear.
4、Lighting method
Take out the oil dipstick of the Tunnel Mucking Loader and hold it up 45 degrees, observe the oil droplets of the oil under the light, and see clearly that there is no abrasive end in the oil droplets as good. If there is too much wear and tear, the oil of the rock loader should be replaced in time.
So when you want to detect whether the oil of the electric Tunnel Mucking Loader is expired, you can take the above methods to detect, but note that for different specifications of the type of rock loader, the applicable detection methods will be different, so you must first select the appropriate detection method before testing.
