If the tunnel mucking loader is in use or if it is slow or slow, we should start from the hydraulic system, including oil seals, oil pipes, operating valves, etc. Now many cities have old city renovation policies, and the demolition and reconstruction work is in full swing. in. The tunnel mucking loader can help us to carry out the demolition and remodeling work, but sometimes the construction work will encounter slow steering problems. Why? How to solve? In response to these problems, the relevant personnel of Luoyang Mingyuan Mining Equipment Manufacturing Co., Ltd. will give you a detailed introduction, hoping to better help everyone.
1. When the tunnel mucking loader shows a slow turn, it is sometimes caused by leakage in the hydraulic steering system. Because when the hydraulic oil loss of the tunnel mucking loader is large, the system pressure will drop, causing the steering cylinder and the motor to move unsteadily, causing the steering to be slow and weak. In severe cases, even the steering cannot be turned. Leakage failure.
Solution: For the leakage problem of this hydraulic system, we need to check the various seals, to see if the seals have wear problems;
2, in addition to the sealing problem, parts aging, tubing joint problems, interface gap problems will cause the tunnel mucking loader to turn slowly.
Solution: We also need to see if the seal is aging, whether the oil pipe joint can not be matched, whether there is interface gap, improper sealing, or oil pipe leakage caused by oil pipe rupture, etc., should be repaired in time.
