The muck loader is one of the machines for cave slag removal, and it is the slag removal equipment in tunnel construction and construction projects. Its existence and application are critical to all shaft slag removal work. However, the after-sales service staff of the muck loader manufacturer visited and investigated the whole process and found that many customers did not fully grasp the application of the cave muck loader, which may lead to many redundant equipment failures. When applying muck loaders, what problems must people pay attention to? The editor will explain your doubts below, and quickly grasp it.
1. The particle size of the stone
When the muck loader starts to lose the crushed stone, it must pay attention to the size of the stone. The design time of each mine slag loader is limited according to the size of the stone. According to the total width of the conveyor belt, the stone cannot be very large. If people can reduce the cost, there is no scientific calculation when discharging the gun. , Causing the crushed stone to be very large, it is very easy to scratch the conveyor belt, causing unnecessary damage.
2. On-time moisturizing
During the whole process of operation of the muck loader, because the large and small arms and the bucket continue to reciprocate, it is very easy to cause damage to the connecting shaft pin, so people must pump in unsalted butter on time. As for the frequency of unsalted butter, people must be clear based on the damage level of the shaft pin.
3. Regularly carry out disassembly and replacement of gear oil
After gear oil is used for a period of time, it is inevitable to infiltrate smoke and dust in the mine. If the accumulated smoke and dust infiltrate the hydraulic transmission system, it will block the gasoline pump, the actual operation valve and the diverter, etc. The lack of power of the entire equipment severely reduces the service life of the muck loader, so people must cultivate the habit of regularly performing gear oil changes.
