Everyone knows that the conveyor belt of the mucking loader is a wearing part (consumable) of the wheel mucking loader. Generally speaking, the life of a conveyor belt of the mucking loader is about six months. It can be used if it is properly maintained. Seven to eight months to a year is not impossible.
Today, the editor will take you to learn some common sense of maintenance of mucking loader conveyor belt.
1. When the mucking loader is walking, it is strictly forbidden to rotate the conveyor belt to reduce the rotation frequency of the conveyor belt and extend its service life.
2. When the mucking loader is digging and picking up, there may be some large stones, especially large stones with sharp edges. Be careful not to force through the gantry to prevent the conveyor belt from being scratched one by one. At this point, you can break the hundreds of kilograms of stones and then load them.
3. The slag loader is working (during digging and slagging), pay attention to the bucket teeth not to hang on the rotating conveyor belt.
4. If the mucking loader is used for a long time, the roller may fall off. At this time, it should be handled in time to prevent the conveyor belt from hanging.
5. When the slag loader excavates and transports, after the shovel mouth is raised, the life of the conveyor belt is reduced because the stones under the driven roller just support the rotating conveyor belt.
Of course, if the tunnel is used for earthwork and properly maintained, the conveyor belt will last longer.
When the mucking loader is working, the conveyor belt is one of the parts that often come into contact with the stone, so its life may increase with the use time, and the lack of maintenance knowledge of the operator makes the vulnerable parts including the conveyor belt Wear. Therefore, the operator's knowledge of the maintenance and maintenance of the muck loader determines the life of the vulnerable parts of the miner.
