Mining Mini Mucking Loader Knowledge, How To Clear The Dead Angle In The Maintenance Of The
Mine Tunnel Mucking Machine
1. Inability to work
After inspection, tunnel mucking machine was found that the inner layer of the intake pipe was peeled off, and the water temperature of a diesel engine was too high, and the power dropped.
The results confirmed that the cloth-covered hose was stronger than the pure rubber hose due to the falling of the curtain on the inner wall of the radiator hose and blocking the circulating water channel. The manufacturer of the crawler mucking loader tells you that the thin rubber layer on the inner wall of the cloth hose is easy to fall off because it is surrounded by multiple layers of cord in the hose during the operation, because it receives circulating hot water or air flow for a long time. The smaller cross section prevents the movement of circulating water or air, which constitutes the above problems.
2. The parts of the crawler mucking loader gradually fail due to the accumulation of time
The softening of the mini mucking loader spring and the formation of scale are attributed to this situation. The softening of the spring will have a serious impact on the normal operation of the locomotive. Many operators think that the cooling system scale has little effect on the engine operation and the cleaning and maintenance work is more troublesome, so they don’t care about mucking rock loader, but after the cooling system generates scale, it is because The third is that the thermal conductivity is poor, and the manufacturing accuracy of the accessories is over-trusted, so the inspection before the installation is ignored. For example, the side gap and back gap of the piston ring, if these gaps are too small, mucking rock loader is easy to cause the piston ring to be stuck or broken. Therefore, mini mucking loader is suggested that the operator must strengthen the inspection and maintenance of all parts of the agricultural machinery in the daily maintenance operations, so as not to leave dead ends, and not to miss any suspicious points when troubleshooting.