How To Improve The Tunnel Mucking Loader When It Is Working To Improve The Efficiency?
Small tunnel mucking loader maintenance finds the cause of the problem and improves the working efficiency of the mucking loader from the following three points:
(1) Observing the internal leakage of the arm cylinder of the mining mucking loader Repair of the mucking machine introduced the hydraulic system of the imported mucking machine in a specific way.
(2) Check the operating valve of the tunnel mucking loader. To clean the relief valve, check the valve plug for wear and replace if worn. If there is still no change after the safety valve is installed, check whether the spool of the operating valve is worn. The clearance limit is typically 0.06mm and should be replaced.
(3) Measure the pressure of the hydraulic pump of the tunnel mucking loader. If the pressure is low, the adjustment is made and the pressure is still not adjusted, which clarifies the severe wear of the hydraulic pump.
