How to clean and maintain the small mini mucking loader after the rain
1. Clean the whole machine of the tunnel mucking machine in time .In case of heavy rain, the tunnel mucking machine should be cleaned in time. Sludge may accumulate in the space under the vehicle. This is a place to hide moisture and cause rust. And the electric box of the tunnel mucking machine also needs to be checked, which cannot be ignored.
2. The paint of the crawler mucking loader body
The acid content of rainwater has a strong corrosive effect on the paint surface of the small crawler mucking loader. Over time, the painted surface of the mining slag scraper will be damaged. Therefore, in the rainy season, the painted surface of the crawler slag scraper can be repaired. The easiest method is waxing, the longest effect is a sealing glaze. In both cases, an invisible protective coating should be installed on the slag scraper to prevent paint fading and deterioration.
3. Maintenance of chassis chassis, tires and tracks
The chassis is close to the ground and is particularly sensitive to road conditions. This area is often prone to rust and can even loosen or even puncture the hub. The track is broken, so it is necessary to pay attention to the cleaning and rust prevention of the mucking rock loader chassis and the rust prevention of the main frame.
4. Start electric start ignition
Starting a diesel engine in the rain is not easy. The engine can be very fragile, even if it is difficult to start. This failure may be caused by loss of moisture in the ignition system and loss of normal ignition function. So check the electric start switch, wiring, etc.
These are the maintenance that the mucking rock loader needs to carry out when it works in the rain. In actual work, try to avoid the mining slag scraper parked in the open air. It also depends on the situation when working in the tunnel. There is a lot of moisture in the tunnel. It also needs to be timely. Mechanical cleaning and maintenance of the mucking rock loader.
