1. Develop a reasonable management system
In order to ensure the correct and reasonable use of the tunnel mucking loader, it is necessary to formulate a corresponding management system to clarify the main body of responsibility, prevention and future. We need to make some reasonable regulations: We must strictly control the daily maintenance of the machine to keep the machine in good working condition; operate the slag machine master to correctly use and operate the equipment to reduce and prevent mechanical failure caused by human error.
2. Timely maintenance and repair of tunnel mucking loader
The mucking machine will inevitably have various failures during use. Among these faults, some of the faults may have a very small impact on the equipment, some of which are relatively serious, and even cause serious accidents. Therefore, for mechanical failures, regardless of size, it should be eliminated in time to maintain the normal performance of the machine and reduce the possibility of causing more failures.
3. Exclude hydraulic oil impurities
In the environment working in the mine roadway, dust is inevitable. When working, hydraulic oil, oil pipe, operating valve, oil cylinder and other joints should be sealed as much as possible to block impurities from entering the source of the oil circuit; The protection work ensures that the machine can work normally, especially to prevent impurities from entering the interior of the oil circuit. When cleaning the oil circuit, take protective measures as much as possible to prevent impurities from entering the hydraulic system when replacing hydraulic components.
4. Tunnel mucking loader can not be overloaded for a long time
In general, the wear of the parts increases proportionally with the increase in load. The wearing parts of the whole machine have a certain use time, and the tunnel mucking loader can operate in 24 hours in actual use, and its wear and tear will inevitably increase. Ensuring that the machine is not overloaded depends primarily on the operator's use of the tunnel mucking loader. They are required to regularly check the use of consumables, find problems, and replace them as soon as possible.
