Hydraulic system failure:
Hydraulic system failure is one of the most common failures ofMucking Loader, mainly manifested as hydraulic oil temperature is too high, hydraulic pump sound is too loud and so on.
When such failures occur, the hydraulic system should be shut down at the first time, troubleshooting points of failure, and timely replacement of hydraulic oil and filter element.
If you need to replace the hydraulic pump and other components, be sure to choose the original parts of the regular manufacturers to avoid affecting the normal operation of the equipment.
Electrical system failure:
Abnormalities in the electrical system may lead toMucking Loadercan not start, control failure or damage to electrical components and other problems.
Common causes include aging wires, poor contact, blown fuses, controller failure and so on.
Should regularly check the wire connection, replace the aging wire and components, keep the electrical system dry and avoid water, oil and other liquids into the electrical components.
Failure of the track system:
Failure of the track system will seriously affect the normal driving of the equipment, such as track deflection, track slippage, etc.
When you find a track failure, stop the equipment immediately, check whether the track tension is slack, whether the track wheel bearing is damaged, etc., and replace the damaged parts in time.
Transmission system failure:
Transmission system failure may lead to the working mechanism of theTunnel Mucking Loaderspeed instability, insufficient torque or can not run normally.
Common causes include gear wear, bearing damage, drive belt slippage and so on.
Should regularly check the gears, bearings and other transmission parts wear, timely replacement of badly worn parts, and keep the transmission parts clean and lubricated.
Engine problems:
The engine is the power source of theTunnel Mucking Loader, and its performance directly affects the efficiency and stability of theTunnel Mucking Loader.
Engine problems may include insufficient power, starting difficulties, overheating and so on.
These problems may be caused by the fuel system, ignition system, cooling system and other aspects of the failure.
The engine and its related systems should be inspected and maintained regularly, such as replacing the fuel filter, cleaning the injector nozzles, and checking the ignition coil.
