With the development of technology, the tunnel mucking machine is increasingly infiltrating into our lives. Maybe everyone is familiar with the auto repair, I feel that the tunnel mucking machine maintenance is quite strange. Like cars, the brand of tunnel mucking machine is also more and more, the technical parameters and structure of different tunnel mucking machines are different. Therefore, the maintenance knowledge of different brands of tunnel mucking machine is different. However, it is easy to share some of the relevant knowledge about tunnel mucking machine maintenance today.
First we have to find out the cause of the failure of the tunnel mucking machine, and then we will find a solution based on the reasons. The following is a brief analysis of the causes and troubleshooting of the failure of the tunnel mucking machine.
The distributor of the tunnel mucking machine leaked oil. There are four main reasons for this failure:
1. The tunnel mucking machine works frequently or exceeds the load. At this time, what we need to do is to reduce the workload of the tunnel mucking machine and operate the tunnel mucking machine correctly according to the instructions.
2. The temperature of the hydraulic oil is too high. Obviously, what is needed at this time is to lower the oil temperature.
3, hydraulic oil has more impurities, we can release the oil and filter it.
4, the limit cover deformation, which is mainly caused by the distributor lever often over-position, we need to adjust the dispenser lever to repair.
