The crawler mucking loader is a common mining tool in our life. Its powerful performance and complete functions make outstanding contributions to the construction of our beautiful city. But no matter how much we like and maintain the crawler mucking loader, it still has more or less various failures during use. What kind of failures usually occur in our work?
Crawler mucking loader suddenly does not walk
A crawler mucking loader suddenly could not walk on the way back after finishing work at the steel slag loading and unloading site. We must first check that the tires are turning well and the drive shaft is normally driven. Disassemble the pilot oil pipeline that controls the high and low gears of the slag excavator, change the high and low gears, observe the powerful oil of the oil pipe, and eliminate the failure of the stop valve and hydraulic oil circuit. The engine is turned off, the running device is in the stop braking state, the transmission box observation port cover is opened, the gear shifting fork is inspected, and the middle of the shifting fork is felt by hand, and is separated from the sliding sleeve, and the preliminary judgment is that the fork is broken. According to the break condition of the fork, analyze the cause of the fault.
