Crawler Mucking Rock Loader has great traction and strong loading capacity. Sealed and lubricated track, the tensioning track device is easy to adjust and has a long service life; the special tooth for the excavator is durable and interchangeable; the conveyor can unload the rock from the tail into the dump truck, shuttle car, side Unloading mine car, belt conveyor, bucket and other transfer equipment; the main action is controlled by pilot valve, easy and convenient to operate, comfortable, flexible, strong climbing ability, stable and no impact; can be equipped with hydraulic breaker, right The bottom of the roadway and the bottom of the side slab are crushed, repaired, and the large rock and coal block after blasting are broken and hammered. The work arm can be used to realize the face face danger, the whole section is loaded with rock, no dead angle is left, no labor is required. Auxiliary cleaning of the work surface.
Crawler Mucking Rock Loader is likely to be at a high point and should be suitable for its excavator loader: Type 60 2.2*2.2 m; Type 80 2.4*2.4 m; Type 100 2.6*2.6 m; Type 120 3.0*3.0 m; 150 type 3.4*3.4 meters; 180 type 3.8*3.8 meters; suitable section of large slope inclined well: 60 type crawler type 2.2*2.2 meter section, maximum working slope 28 degree slope; 80 type crawler type 2.4*2.4 meter section, maximum Working slope 30 degree slope; 100 track type 2.6*2.6 m section, maximum working slope 30 degrees; 120 track type 2.8*2.8 m section, maximum working slope 30 degrees; 150 track type 3.0*3.0 m section, maximum working slope 30 degrees 180 track type 3.8*3.8 m section, maximum working slope 32 degrees is suitable for tunnel section, tunnel section, roadway section, shaft section, inclined section, section section, diversion section, diversion section, culvert section, Mine section, underground construction section, geotechnical section, mining section, mining section, large section, small section excavation and loading, traction, transportation equipment and accessories.