The use of the mucking rock loader in the mine is very much, because it has the advantages of convenient loading and unloading, many benefits, durability, etc., and our slag slag machine is developing more and more rapidly, so what basic inspections do we need before use? what about work?
The mucking rock loader should do the following basic checks before use.
1. Check the rollers to see if they are working properly. The mucking rock loader operator can turn on the drum motor and let the mucking rock loader's drum motor run for five minutes, then check if the roller and drum are flexible and have abnormal sound.
2. Check the multi-way operation valve. The mucking rock loader operator should ensure that the joysticks are in the neutral position, and the operation should be flexible and free from sticking.
3. Check the power supply, turn on the two-phase switch after turning on the power, and let the motor run for a while.
4. mucking rock loader Check the screws of each component to check if there is looseness.
5. Check each cable and connector to check whether it is intact or not. Also, there is a connection line of mucking rock loader to check whether it is intact and whether it is burnt or loose.
Before the mucking rock loader is used, the mucking rock loader operator must follow the operating procedures to avoid unnecessary mistakes caused by human error. It can also make our slag slag machine bring more convenience to our work. If you want to know more about mucking rock loader, or if you don't know anything, you can call us.
