The mucking loader can be divided into two types: telescopic and trolley. Suitable for narrow spaces in small spaces. When the mucking loader was ready to start work, it was found that it could not be fired. How to deal with it?
When the machine is on fire, the key will be inserted into the switch, the battery power will be activated, and then all circuits will be connected so that the ignition can be successful. If there is a problem in any of the links, it will not catch fire. Usually the situation is not fired: the equipment does not respond or the starting motor speed is too low.
1. We can carefully check the start relay and fuse box of the machine. Open the relay box, check if the connector is loose, and then open the fuse box to check if the start circuit fuse is burnt out.
2. When it is not possible to fire, our reaction is that there is a problem with the battery. We must carefully check whether the battery has electricity, whether the battery pile head is in poor contact, and whether the voltage is insufficient. If the battery is not charged, it is simple, replace the new battery directly; if the battery pile head is in poor contact, carefully check each pile head, do not clean the pile head, then tighten the screw of the pile head, after all, the battery pile If the head accumulates too much dust, it will also affect the battery.
3. of course, if you find that the battery is no problem, then it is necessary to check whether the battery line is a problem, after all, the line is not connected or short circuit, or broken, or loose, will cause the battery can not supply power to the machine, naturally can not catch fire.
In addition to problems such as batteries, wiring, electric piles, relays, fuse boxes, etc., the mucking loader can't be fired. Motor or generator failures can also cause fires, so when you are unable to start the fire, you may want to check carefully. The above several components.
The mucking loader is suitable for construction machinery and small-section diversion tunnels for tunnel excavation, mining engineering, hydraulic engineering, etc., and mine slag (mine) machinery. This machine is mainly used for some production operations with narrow space, small-scale production of phosphate rock and metal. Gravel earth material collection and transportation loading and construction in non-explosive dangerous mines such as metal mines. Therefore, if there are any problems in the process of use, it is necessary to check and repair in time.
