For each good muck loader, in order to ensure the reliability of the circuit system of the entire mine muck loader, the manufacturer will set up multiple maintenance options for the circuit system. People also have to do a good job in inspection and repair work in their lives. How should they actually do it? The editor of the slag raking machine manufacturer will answer for you.
1. Pay attention to check the working voltage of the motor, power switch and its power supply system. It can only ensure the normal operation of the muck loader at all levels, ensure the normal operation of the motor, and reasonably ensure the renewal of the project. The motor should be removed for maintenance on time. Clean the rolling bearing and add an appropriate amount of grease.
2. When carrying out motor maintenance work, be careful not to disassemble or assemble certain components, such as the brake system wheel of the slag loader and the electric fan cover, and then start the trial operation. The disassembly sequence is as follows, the entire equipment is disassembled from the supporting facility server. Then press: fan cover (end cover) one by one lock nut one by one fan brake system wheel one by one front end development cover one by one motor rotor assembly line one by one rear bearing end cover sequence Do not disassemble randomly.
3. If there is a situation where the muck loader cannot operate, pay attention to whether there is a serious stuck condition in the operating parts, and carry out inspections on the mining and tunneling face, because if it is more serious The unevenness of the motor will endanger all the normal operation of the motor. At the end of disassembly and assembly, pay attention to the installation work. The ballasting machine motor must adopt the boss installation method. The four holes on the front end development cover are used as installation holes. The inner holes and inner hole B of the front end development cover are used as positioning surfaces.
Another thing to pay attention to is the maintenance of the slag loader battery, which is the "kinetic energy source" for most crane equipment to start diesel engines, electrical systems, lighting fixtures and auxiliary electrical equipment. Therefore, it can also be said to be the "cardiovascular" of the slag scraper, showing fresh blood for the equipment.
