In order for the tunnel mucking machine to play a better role in use, this requires us to minimize the occurrence of faults during use, so how to reduce it?
1.Select the correct lubricant
According to statistics, most of the failures caused by the wear of mechanical equipment are caused by the wear of parts' working surfaces. Nowadays, with the use of excellent materials, advanced technology and reasonable design, a large part of the wear of the parts' working surfaces is caused by the wrong use of lubricants. Then the correct and reasonable selection of lubricants has become a measure to reduce the rate of mechanical failure. When selecting lubricants daily, remember to strictly follow the standards. Select and use the corresponding lubricant according to different machine models and structures. It is strictly forbidden to use the wrong lubricant to cause mechanical failure.
2. Make sure that the machinery is not overloaded.
If the tunnel mucking machine is often overloaded, the wear rate of its internal components will increase significantly, which will lead to an increase in the failure rate and reduce the service life of the machine. Then, if the machine is to work under normal load, the operator is required to strictly follow the operating procedures, and it is strictly prohibited to use it illegally, causing the engine and working device to move up and down.
3. Regularly repair and maintain the machine.
In order to better allow the tunnel mucking machine to work for us, relevant personnel should regularly repair and maintain it. Because the timely treatment of failures is a powerful measure to reduce and prevent failures. Remember that you ca n’t ignore the cause because it ’s small, because it ’s often these small faults that we can easily ignore. After a long time of wear or the superposition of multiple small faults, it causes a big fault. occur.
