Everyone knows that mucking loader can be used for tunnels and cave operations. It is very convenient and has changed the defects of large machinery in this respect. However, the safe operation of mucking loader is very important, because the space in tunnels and caves is relatively small, so it must be be careful. Strict implementation of the mucking loader operational behavior guidelines can effectively improve the efficiency of the mucking loader, and can also effectively prevent the occurrence of various major security incidents.
(1) Turn on the mucking loader main power switch.
(2) Start the mucking loader motor.
(3) It can only be used with pressure after 10 seconds of startup. If the machine is shut down for more than 4 hours, let the pump run for 5 to 10 minutes to work with pressure.
(4) Lower the mucking loader transport shovel to the ground.
(5) Manipulating the mucking loader to advance forward, gather the stones and flatten the ground.
(6) Confirm that the reloaded vehicle enters the unloading part of the mucking loader and then pull the handle to the forward rotation.
(7) Manipulating the mucking loader pilot valve in turn to raise the boom, extend the arm, place the bucket in a position with the arm, and then lower the boom and retract the arm (while making the boom up and down Move the stone into the transport slot. Rotating the swivel arm can be taken in a larger range, and it is beneficial to properly pick up the bucket according to the distance of the stone. Generally, the arms should not be moved to the extreme position during the drawing process to avoid frequent transitional impact and shorten the service life of the machine. At the same time, it can avoid the phenomenon that the oil temperature is too high due to the overflow of the overload valve. In particular, be careful not to cause the bucket to directly hit the transport slot, otherwise the tank will be seriously deformed.
