What Is The Reason Why The Motor Of The Tunnel Mucking Machine Does Not Move The Hydraulic Oil Pump?
The problem that the hydraulic system motor of the belt tunnel mucking machine does not move the hydraulic pump is relatively common, generally because the pressure of the relief valve of the crawler mucking loader is not adjusted properly or the hydraulic valve is blocked. Of course, there are other reasons that may also cause the crawler mucking loader. The hydraulic system motor of the machine does not work with the hydraulic pump, and the hydraulic system motor of the crawler mucking loader does not work with the hydraulic pump
Reason: adjust the relief valve, check the system pressure from small to large, and adjust the relief valve to the normal operating pressure; When the mini mucking loader system is not working, the system of the integrated slag scraper should be pressure relief and overflow. If the pump is stopped during this period (no load) and the motor is not working, the valve may be blocked, check, and try again after cleaning. There should be no problem; the overload setting of the motor of the mini mucking loader is too low to cause a trip and stop the pump. This may also be the case. Some components are of poor quality. The hydraulic station is composed of a hydraulic pump, a driving motor, a fuel tank, a directional valve, and a throttle. Hydraulic source equipment composed of valves, relief valves, etc., or hydraulic equipment including control valves. Supply oil according to the flow direction, pressure and flow required by the driving equipment. It is suitable for various machines where the driving equipment is separated from the hydraulic station. Connect the hydraulic station and the driving equipment (cylinder or motor) with oil pipes, and the hydraulic system can realize various regulations.
