The function of the clutch in the mucking loader accessories is to ensure the stable and reliable connection between the diesel engine and the transmission device of the mine mucking loader. The friction torque is caused, and the separation means the elimination of the friction torque. It is an important part of the mining tunnel mucking loader, so how to diagnose the clutch failure?
Due to the effect of rolling friction, the tunnel mucking loader is often very easy to wear, deform or crack, etc., and the friction torque is relatively reduced, resulting in common failures of the clutch system. In order to maximize the service life of the clutch, how to properly maintain and maintain the clutch system seems to be very important. Check whether the clutch disc total stroke, cover total stroke, and water pump flywheel of the slag scraper accessories are worn too much, the clutch pressure plate is separated out, and the clutch pressure plate torque plane is worn too much. The friction plate of the total disc is worn out. The bolts should not be exposed; use a micrometer to measure accurately, and the wear of the inner hole of the clutch pressure plate of the cover should not exceed 0.3 mm during the work; The depth of wear should not exceed 0.5 mm. The arc surface of the finger end when the clutch pressure plate is separated should not be ground off; mucking machine the concave arc of the clutch pressure plate torque plane should not be ground; those that do not meet the specifications should be replaced. However, in the whole process of maintenance, it should be noted that when a certain part does not meet the regulations, it must be replaced independently, and it is not necessary to replace the complete set of equipment vaguely.
