From May to the end of August are hot summer period, high temperature every day, it is easy to cause unnecessary accidents, this time we should prevent in advance to do a good job tunnel mucking loader high temperature protection.
First of all, we should seriously do a good job of tunnel mucking loader maintenance work. The slag raking machine for all aspects of maintenance, the engine to replace the “three filters” and oil, replace or adjust the belt, check the fan, water tank, generator, compressor performance is reliable, if necessary, maintenance, repair or replacement mucking rock loader.
Secondly, for the high temperature area working mini mucking loader appropriate to increase the viscosity level of the oil, at the same time, check the cooling system, fuel system is smooth, and replace the aging wires, plugs, tubes, screws, tighten the fuel pipeline, to prevent fuel leakage. Clean up the engine body oil, dust, to ensure that the engine “light load”, good heat dissipation. Fine sand recovery engine oil and lubricants need to replace the use of summer oil, the right amount of oil, often check whether there is oil leakage, especially fuel, should be supplemented in a timely manner.
The mini mucking loader battery also needs to be replenished in a timely manner, the charging current should be appropriately reduced, each circuit connector should be firm and reliable, aging circuits should be replaced, and the fuse capacity should meet the safety and safety requirements.
It is worth noting that the scraper should be equipped with 1-2 fire extinguishers randomly. The mucking rock loader should be parked in a cool place as much as possible, avoiding direct sunlight exposure. Reduce tire pressure appropriately to prevent tire blowouts. We have adopted a combination of forced cooling and natural cooling methods to improve the integrity rate of equipment during high-temperature operation.
