Mini Mucking Loader is a special equipment used to clean up slag, slag and other high-temperature slag, mainly used in metallurgy, electric power, chemical industry and other industries. Correct use of Mucking Loader can not only improve efficiency, but also to ensure operational safety. The following is the use of slag raking machine:
First of all, before using the equipment need to check whether the components are intact, including the hydraulic system, electrical system, mechanical transmission components, etc., to ensure that there is no abnormality. Check whether the hydraulic oil level is normal, oil pipe has no leakage, whether the electrical wiring is intact. At the same time to confirm that the environment around the slag raking machine is safe, no idle people.
Secondly, start the equipment should first turn on the power supply, start the hydraulic system, let the equipment run unloaded for 3-5 minutes, observe whether the operation of the components is normal. When operating, you need to wear protective gear, including high-temperature resistant gloves, protective masks and so on. The operator should stand in a safe position, through the control handle or operating table to control the movement of the slag raking machine.
Slag raking process to maintain a uniform speed operation, avoid sharp stops and starts. mining Mucking Loader shovel should be inserted smoothly into the slag layer, not too hard. When encountering large pieces of slag, it can be broken before raking. Slag raking machine work should pay attention to observe the slag temperature, avoid high temperature burns.
After the completion of the operation, the mining Mucking Loader should be moved to a safe position, clean up the residual slag on the bucket. Before turning off the power supply to let the hydraulic system run unloaded for 2-3 minutes, so that the oil temperature is reduced. Regular maintenance of equipment, timely replacement of worn parts.
Finally, the operator must be professionally trained and familiar with the equipment performance and operating procedures. It is strictly prohibited to operate under the influence of alcohol or fatigue to ensure safe production.
