As China's comprehensive national strength continues to increase, our lives have also enjoyed a lot of taste. In our lives, we can see some technology products everywhere. The integration period between us and these technology products is also slowly deepening our impression of it. Today, one Say we are using precautions during the run-in period with the crawler mucking loader.
1. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load. The appropriate amount of work should be arranged to prevent the overheating caused by the high load of the machine.
2. Because the crawler mucking loader is a special vehicle, the operator should receive training and leadership from the manufacturer, have a good understanding of the structure and mechanical properties of the equipment, and have certain maintenance experience before operating the machine. The manufacturer's product use protection instructions are the necessary materials for the operator to manipulate the equipment. Before opening the crawler mucking loader, you must first browse the crawler mucking loader manual, and operate and maintain according to the requirements of the manual.
3. Always check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) position and quality, and pay attention to check the sealing performance of the whole machine. The lack of oil in the invention during the inspection should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to fill the lubrication point with grease during each running-in period.
4. Look at the meters of the crawler mucking loader at any time. If the instrument is abnormal, it should be stopped in time to eliminate it. If the cause is not found and the fault is not eliminated, the operation should be finished.
5. Keep the equipment clean, adjust and tighten the loose parts in time to prevent the parts from being worn out or the parts being lost due to looseness.
6. After the running-in period, the machine should be maintained, and pay attention to the exchange of the oil filter.
